15mm x 1/2″ Flat Face Isolating Valve – Service Valve for Tap Flexis

15mm x 1/2″ Flat Face Isolating Valve – Service Valve for Tap Flexis

• 15mm Compression fitting to copper/plastic one end
• 1/2″ flat face BSP thread (measures approx. 20mm) the other end
• Ideal for screwing monobloc tap flexis straight onto the end

Most plumbers/DIY’ers usually remove the nut and olive from a standard isolation valve and screw the flexi on. This is not the correct way to do this! Removing the olive reveals a sharp bevelled edge that can easily split the washer if over tightened, causing a leak

Details

The 15mm x 1/2″ Flat Face Isolating Valve is a professional-grade service valve designed specifically for connecting flexible tap tails. Specifically, the flat-face design provides a wide, smooth surface area for the rubber washer of a flexi hose to seal against perfectly. This valve features a 15mm compression inlet and a 1/2-inch BSP male outlet. Furthermore, the integrated ball valve allows for a quick, screwdriver-operated water shut-off. Consequently, it represents the most reliable way to install modern taps without damaging their delicate seals.

Connecting a flexible tap hose to a standard isolating valve often reveals a frustrating and hidden leak risk. Specifically, many standard valves have a “tapered” or sharp edge on the threaded end. When you tighten your flexi hose onto it, that sharp edge can bite into or even slice the rubber washer, causing a slow drip that’s hard to stop. Moreover, over-tightening to stop the leak usually just makes the damage worse. However, this Flat Face Service Valve eliminates this struggle entirely. Because the mating surface is completely flat and broad, it supports the entire washer evenly for a watertight seal with minimal torque. Therefore, you achieve a professional, leak-free connection that protects your tap hoses for the long term.

Brand:

• KeyPlumb

MPN:

• KPSTRFLA151/2 / K23853