40mm to 43mm Multifit 45-Degree Compression Waste Pipe Elbow Bend (1.5″)

40mm to 43mm Multifit 45-Degree Compression Waste Pipe Elbow Bend (1.5″)

Features

This 40mm to 43mm multifit 45-degree compression waste pipe elbow bend provides a reliable, tool-free plumbing solution designed to gently alter the direction of standard 1.5″ waste pipes around shallow angles. Engineered with a flexible multifit compression design, this 45-degree connector accommodates outside diameters ranging from 40mm to 43mm—making it fully compatible with plastic push-fit, plastic solvent weld, copper, lead, and cast iron pipes. Furthermore, the simple nut-and-cone washer mechanism allows for a straightforward manual installation without requiring specialized tools or solvent cement. As a result, you achieve a watertight, permanent angled join across mixed or identical waste pipe materials.

• 45-Degree Gradual Bend: Features a smooth 45-degree elbow configuration to route waste runs around gentle offsets and obstacles. Therefore, it solves complex spatial challenges in tight kitchen and bathroom cabinets while maintaining optimal flow.
• Multifit Universal Compatibility: Engineered to bridge pipes measuring 40mm to 43mm in outside diameter. Consequently, it seamlessly connects varying pipe types including plastic, copper, lead, and iron.
• Tool-Free Compression Design: Features an intuitive nut, nylon washer, and tapered rubber seal setup on each end. Moreover, it allows for a fast, hand-tightened installation that achieves an immediate watertight seal.
• Versatile Application: Ideal for routing discharge pipes on baths, kitchen sinks, shower trays, wet rooms, and appliance waste lines like washing machines. As a result, it provides a dependable angled link for repairs and retrofits.
• Durable Construction: Built from high-grade polypropylene designed to withstand daily hot water flow and household chemicals. Furthermore, it ensures long-lasting, leak-free performance that won’t degrade over time.

Technical

• Brand: VIVA
• MPN: W40E
• Product Type: Multifit 45-Degree Compression Waste Pipe Elbow Bend
• Pipe Size Compatibility: 40mm to 43mm Outside Diameter (Standard 1.5″ Waste)
• Bend Angle: 45 Degrees (135 Degrees)
• Material Compatibility: Plastic Push-Fit, Solvent Weld, Copper, Lead, and Iron
• Connection Type: Compression (Nut, Nylon Washer, and Tapered Rubber Cone on Both Ends)
• Material: High Quality Polypropylene
• Application: Routing 1.5″ Waste Pipes Around Gentle Angles Across Kitchens and Bathrooms

Details

Routing a kitchen sink, bath, or appliance waste pipe around a gentle offset or obstacle often requires a shallow angle rather than a sharp right turn. Moreover, trying to force rigid solvent welds or mismatched pipe materials into awkward diagonal alignments can lead to joint stress and leaks.

Fortunately, this 40mm to 43mm multifit 45-degree compression elbow solves the problem with universal efficiency. Because its tapered rubber cones and compression nuts adapt to any pipe type between 40mm and 43mm at a smooth 45-degree angle without requiring tools, it makes diagonal directional changes effortless. Consequently, you achieve a neat, robust, and completely watertight angled joint.

Instructions

1. Simply slide the white nut over the pipe first along with the nylon washer, before the pointed black rubber washer
2. Make sure that the black rubber washer is pointing the thin end towards the white fitting you have yet to put on and slide the rubber on an inch or so
3. Push the rest of the fitting on so that the rubber joins up with the plastic fitting, you may then try and push the fitting with the rubber further down the pipe if need be
4. Finally bring the nut back and screw onto the rest of the fitting, compressing the pointed washer against the plastic to make a seal, then repeat the action for the other side and that’s it!

Discover

Explore Our Full Range of 40mm Compression Waste Fittings – CLICK HERE