32mm-36mm Multifit 45-Degree Trap Outlet Connector (1.25″)

32mm-36mm Multifit 45-Degree Trap Outlet Connector (1.25″)

Features

This 32mm to 36mm multifit 45-degree trap outlet connector immediately re-routes waste pipes in a new direction from basin, cloakroom sink, or bidet traps. Featuring a gentle 45-degree angle with a universal compression outlet, it provides a fast, tool-free watertight directional change in tight spaces.

• Dedicated 32mm Trap Compatibility: Specifically tailored for 32mm (1.25″) drainage systems found on wash basins, cloakroom sinks, and bidets.
• 45-Degree Angled Bend: Features a gentle diagonal offset profile to immediately re-route waste lines away from the fixture trap.
• Multifit Universal Compatibility: Engineered to bridge pipes measuring 32mm to 36mm in outside diameter across plastic, copper, and lead.
• Secure Compression End: Features a reliable hand-tightened compression connection that secures instantly without messy glue or solvents.
• Durable Polypropylene Build: Constructed from high-grade polypropylene to withstand daily hot water discharge and household chemicals.

Technical

• Brand: VIVA
• MPN: W32F
• Product Type: 45-Degree Plain End Basin, Cloakroom Sink & Bidet Trap Outlet Connector
• Pipe Size Compatibility: 32mm to 36mm Outside Diameter (Standard 1.25″ Waste)
• Bend Angle: 45 Degrees
• Material Compatibility: Plastic Push-Fit, Solvent Weld, Copper, and Lead Pipes
• Connection Type: Compression x Plain End Trap Spigot
• Material: High-Quality Polypropylene
• Application: Direct-to-Trap 1.25″ Waste Pipe Offset Re-routing for Basins, Cloakroom Sinks, and Bidets

Details

When installing a basin, cloakroom sink, or bidet trap, routing discharge pipes straight out to the wall requires immediate directional changes. This 32mm to 36mm multifit 45-degree trap outlet connector solves the issue with a gentle angled body that connects directly onto the trap and secures with a reliable compression fit for a watertight offset connection.

Instructions

1. Simply slide the white nut over the pipe first along with the nylon washer, before the pointed black rubber washer
2. Make sure that the black rubber washer is pointing the thin end towards the white fitting you have yet to put on and slide the rubber on an inch or so
3. Push the rest of the fitting on so that the rubber joins up with the plastic fitting, you may then try and push the fitting with the rubber further down the pipe if need be
4. Finally bring the nut back and screw onto the rest of the fitting, compressing the pointed washer against the plastic to make a seal, then repeat the action for the other side and that’s it!

Discover

Explore Our Full Range of 32mm Compression Fittings – CLICK HERE