Polypipe PS38 40mm to 32mm Multifit Reducer | 1 1/2″ to 1 1/4″ Waste Adapter

Polypipe PS38 40mm to 32mm Multifit Reducer | 1 1/2″ to 1 1/4″ Waste Adapter

• Genuine Polypipe PS38 professional-grade reducing coupler
• Connects 40/42/43mm pipe to smaller 32/34/36mm pipework
• Universal “Multifit” seals ensure a watertight join on both ends
• Ideal for connecting basin wastes into larger bath or shower runs
• Works with plastic, copper, and lead domestic waste pipes

Instructions

1. Simply slide the white nut over the pipe first along with the nylon washer, before the pointed black rubber washer
2. Make sure that the black rubber washer is pointing the thin end towards the white fitting you have yet to put on and slide the rubber on an inch or so
3. Push the rest of the fitting on so that the rubber joins up with the plastic fitting, you may then try and push the fitting with the rubber further down the pipe if need be
4. Finally bring the nut back and screw onto the rest of the fitting, compressing the pointed washer against the plastic to make a seal, then repeat the action for the other side and that’s it!

Details

The Polypipe PS38 Multifit Reducer provides a seamless transition between different pipe sizes in a domestic waste system. Specifically, this reducing joiner connects a 1 1/2″ (40mm) pipe run to a 1 1/4″ (32mm) pipe run. The universal internal seals accommodate various diameters, fitting 40–43mm on the large side and 32–36mm on the small side. We manufacture the PS38 from high-impact polypropylene to ensure the colour stays a crisp white and resists household chemicals. In short, this adapter offers a simple, tool-free way to merge different drainage lines into a single system.

Standardising a plumbing system is often impossible when you need to connect a small basin waste into a larger main drainage run. Furthermore, many reducers only work with specific plastic brands, leaving you stuck if you encounter older lead or copper pipes. Specifically, using a permanent solvent-weld reducer in a cramped vanity unit makes it impossible to dismantle the joint for cleaning or future upgrades. However, the Polypipe PS38 Multifit Reducer solves these compatibility and access problems. It bridges the gap between different pipe standards and materials with a secure, mechanical seal. Because it uses compression nuts, you can adjust the alignment or remove the fitting in seconds. Therefore, you can complete complex plumbing transitions with a professional, leak-proof finish.

Brand:

• Polypipe

MPN:

• PS38