Polypipe PS16 40mm Multifit Compression Elbow | 1 1/2″ Waste Pipe Bend

Polypipe PS16 40mm Multifit Compression Elbow | 1 1/2″ Waste Pipe Bend

• Genuine Polypipe PS16 professional-grade waste fitting
• Universal “Multifit” connection for 40mm, 42mm, and 43mm pipes
• Secure compression seal works with plastic, copper, and lead
• Ideal for 1 1/2″ bath and kitchen sink waste installations
• Robust white polypropylene build resists high water temperatures
• For various waste pipes such as plastic pushfit, plastic solvent weld, iron or copper etc… with the same outside diameters

Instructions

1. Simply slide the white nut over the pipe first along with the nylon washer, before the pointed black rubber washer
2. Make sure that the black rubber washer is pointing the thin end towards the white fitting you have yet to put on and slide the rubber on an inch or so
3. Push the rest of the fitting on so that the rubber joins up with the plastic fitting, you may then try and push the fitting with the rubber further down the pipe if need be
4. Finally bring the nut back and screw onto the rest of the fitting, compressing the pointed washer against the plastic to make a seal, then repeat the action for the other side and that’s it!

Details

The Polypipe PS16 Multifit Elbow offers a high-performance 90-degree solution for 1 1/2″ drainage systems. Specifically, this 40mm compression fitting features a universal internal seal that accepts pipe diameters of 40mm, 42mm, and 43mm. The design allows you to create a watertight connection by simply hand-tightening the nut. We manufacture the PS16 from durable polypropylene to ensure the colour remains a clean white while resisting household detergents and boiling water. In short, this elbow provides a versatile, leak-proof join for baths and kitchen appliances.

Many homeowners find that modern 40mm plastic pipes don’t always align perfectly with older waste systems or different brand standards. Furthermore, using solvent-weld fittings in cramped spaces under a bath is difficult and leaves no room for adjustment if the angle is slightly off. Specifically, a minor measurement error can result in a permanent, leaking joint that requires you to cut out and replace sections of pipe. However, the Polypipe PS16 Multifit Elbow eliminates these installation risks. It bridges the gap between varying pipe sizes and materials, allowing for a perfect fit every time. Because it uses a compression mechanism, you can easily loosen the nut to adjust the alignment or dismantle the joint for maintenance. Therefore, you can finish your plumbing project quickly with a secure, professional result.

Brand:

• Polypipe

MPN:

• PS16