Polypipe PS17 32mm Multifit 45° Compression Elbow | 1 1/4″ Waste Pipe Bend

Polypipe PS17 32mm Multifit 45° Compression Elbow | 1 1/4″ Waste Pipe Bend

• Genuine Polypipe PS17 high-quality waste fitting
• Versatile 45-degree angle for precise drainage alignment
• Universal “Multifit” technology fits 32mm, 34mm, and 36mm pipes
• Compression nut provides a secure, tool-free watertight seal
• Suitable for plastic, copper, and lead 1 1/4″ waste pipes

Instructions

1. Simply slide the white nut over the pipe first along with the nylon washer, before the pointed black rubber washer
2. Make sure that the black rubber washer is pointing the thin end towards the white fitting you have yet to put on and slide the rubber on an inch or so
3. Push the rest of the fitting on so that the rubber joins up with the plastic fitting, you may then try and push the fitting with the rubber further down the pipe if need be
4. Finally bring the nut back and screw onto the rest of the fitting, compressing the pointed washer against the plastic to make a seal, then repeat the action for the other side and that’s it!

Details

The Polypipe PS17 Multifit 45-Degree Elbow provides a professional solution for navigating offset pipework. Specifically, this 32mm compression joiner features a shallow bend, which improves flow and reduces the risk of blockages compared to tight 90-degree angles. The universal internal seal accommodates various pipe diameters, including 32mm, 34mm, and 36mm. We manufacture this fitting from durable white polypropylene to ensure the colour stays consistent and the body resists hot water and chemicals. In short, this 45° bend offers maximum flexibility for basin and appliance waste installations.

Running waste pipework in tight or awkward spaces often requires more than just standard right angles. Furthermore, using a 90-degree bend where a 45-degree one would suffice can lead to slower drainage and more frequent “fatberg” build-ups. Specifically, DIYers often struggle when connecting new plastic pipes to older, non-standard sized plumbing. However, the Polypipe PS17 Multifit 45° Bend solves these awkward geometry and sizing issues. It creates a smooth, gradual transition that keeps water moving efficiently. Because it uses a compression fitting, you can rotate the elbow to the exact angle you need before locking it in place. Therefore, you can complete complex pipe runs with professional accuracy and a leak-proof finish.

Brand:

• Polypipe

MPN:

• PS17