32mm to 36mm Multifit Straight Plain End Basin Trap Extender Connector (1.25″ x 115mm)

32mm to 36mm Multifit Straight Plain End Basin Trap Extender Connector (1.25″ x 115mm)

Features

This 32mm to 36mm multifit straight plain end basin trap extender connector provides a reliable, adjustable plumbing solution designed to bridge the gap when a wash basin trap outlet and wall waste pipe do not quite align. Engineered with a plain spigot on one end to connect directly into a standard 1.25″ basin or bidet trap and a compression fitting on the other, this 115mm-long extension piece accommodates outside diameters ranging from 32mm to 36mm across plastic push-fit, solvent weld, copper, and lead pipes. Furthermore, the generous overall length can be easily cut down on-site with a hacksaw if a shorter extension is required. As a result, you achieve a seamless, customized, and completely watertight straight extension.

• Direct Trap Outlet Extension: Designed to insert straight into the outlet of a 32mm basin, cloakroom sink, or bidet trap. Therefore, it easily bridges misaligned gaps between the trap and the main waste run.
• Cut-to-Length Flexibility: Measures 115mm overall in length and can be trimmed down easily by the installer if a shorter reach is needed. Consequently, it offers bespoke adaptability for tight vanity configurations.
• Multifit Universal Compatibility: Engineered to bridge pipes measuring 32mm to 36mm in outside diameter. Moreover, it seamlessly connects varying pipe types including plastic, copper, and lead.
• Secure Compression End: Features a reliable hand-tightened compression connection on the receiving end. As a result, it ensures a tight, professional seal instantly without requiring messy glue or solvents.
• Durable Polypropylene Build: Constructed from high-quality, high-grade polypropylene. Furthermore, it withstands daily hot water flow and household chemicals to ensure long-lasting performance.

Technical

• Brand: VIVA
• MPN: W32L
• Product Type: Straight Plain End Basin Trap Extender Connector
• Pipe Size Compatibility: 32mm to 36mm Outside Diameter (Standard 1.25″ Waste)
• Overall Length: 115mm (Cut-to-Size Capable)
• Material Compatibility: Plastic Push-Fit, Solvent Weld, Copper, and Lead Pipes
• Connection Type: Plain Spigot Trap Inlet x Compression Outlet
• Material: High-Quality Polypropylene
• Application: Bridging Gaps and Extending Straight 1.25″ Waste Runs from Basin Traps

Details

When installing a basin trap, finding that the trap outlet and the wall waste pipe fall just short of meeting can halt a plumbing project. Moreover, forcing misaligned rigid pipes together causes permanent joint stress and leaks under the sink.

Fortunately, this 32mm to 36mm multifit straight trap extender solves the problem with adjustable convenience. Because its plain end slides directly into the basin trap while the 115mm body can be cut down to your exact required length before securing with a compression fit, it makes bespoke adjustments effortless. Consequently, you achieve a neat, robust, and completely watertight straight connection.

Instructions

1. Simply slide the white nut over the pipe first along with the nylon washer, before the pointed black rubber washer
2. Make sure that the black rubber washer is pointing the thin end towards the white fitting you have yet to put on and slide the rubber on an inch or so
3. Push the rest of the fitting on so that the rubber joins up with the plastic fitting, you may then try and push the fitting with the rubber further down the pipe if need be
4. Finally bring the nut back and screw onto the rest of the fitting, compressing the pointed washer against the plastic to make a seal, then repeat the action for the other side and that’s it!

Discover

Explore Our Full Range of 32mm Compression Waste Fittings – CLICK HERE