Polypipe PS22 40mm Multifit Compression Tee | 1 1/2″ Waste Pipe Branch

Polypipe PS22 40mm Multifit Compression Tee | 1 1/2″ Waste Pipe Branch

• Genuine Polypipe PS22 professional-grade waste fitting
• Three-way “Tee” branch for merging multiple 1 1/2″ waste lines
• Universal “Multifit” technology fits 40mm, 42mm, and 43mm pipes
• Hand-tighten compression nuts for a secure, watertight seal
• Compatible with plastic, copper, and lead 1 1/2″ waste systems

Instructions

1. Simply slide the white nut over the pipe first along with the nylon washer, before the pointed black rubber washer
2. Make sure that the black rubber washer is pointing the thin end towards the white fitting you have yet to put on and slide the rubber on an inch or so
3. Push the rest of the fitting on so that the rubber joins up with the plastic fitting, you may then try and push the fitting with the rubber further down the pipe if need be
4. Finally bring the nut back and screw onto the rest of the fitting, compressing the pointed washer against the plastic to make a seal, then repeat the action for the other side and that’s it!

Details

The Polypipe PS22 Multifit Tee provides a robust three-way junction for 1 1/2″ domestic drainage. Specifically, this 40mm compression branch allows you to connect two separate waste sources into a single outlet pipe. The universal internal seals accommodate a range of pipe diameters, including 40mm, 42mm, and 43mm. We manufacture the PS22 from high-impact polypropylene to ensure the colour remains a clean white while resisting hot water and common household chemicals. In short, this multifit tee offers a versatile, leak-proof solution for bath, shower, and kitchen sink installations.

Merging two waste lines—such as a bath and a basin—into a single 1 1/2″ pipe often reveals frustrating differences in pipe diameters between brands. Furthermore, using permanent solvent-weld tees in restricted spaces under floorboards or behind kitchen units leaves no room for future adjustments. Specifically, a standard 40mm fitting might fail to seal correctly on older, slightly larger 1 1/2″ legacy pipework. However, the Polypipe PS22 Multifit Tee solves these compatibility and access issues. It creates a professional-grade seal regardless of the pipe material or minor size variations. Because you can easily unscrew the compression nuts, you can modify your layout or clear debris without needing to cut the plumbing apart. Therefore, you can complete complex drainage runs with total flexibility and a reliable, dry finish.

Brand:

• Polypipe

MPN:

• PS22