Threaded Male Basin Trap Adaptor (1.25″ to 32mm)

Threaded Male Basin Trap Adaptor (1.25″ to 32mm)

Features

This threaded male basin trap adaptor connects a 1.25″ male thread directly to the trap inlet and steps down to a multifit compression outlet. Featuring a versatile straight design, it allows you to move the position of the trap for better aesthetics or when space is restricted.

• Direct Trap Connection: Features a 1.25″ male thread that connects directly into the inlet of wash basin and cloakroom traps.
• Multifit Compression Outlet: Perfectly accommodates standard basin waste pipes measuring 32mm to 36mm in outside diameter across plastic, copper, and lead.
• Flexible Position Adjustment: Allows you to easily move the position of the trap if you are short on space or for improved visual aesthetics.
• Universal Material Compatibility: Engineered to bridge pipes securely across plastic push-fit, solvent weld, copper, and lead systems.
• Durable Polypropylene Build: Constructed from high-grade polypropylene to withstand daily hot water discharge and household chemicals.

Technical

• Brand: VIVA
• MPN: W32M
• Product Type: Threaded Male Basin Trap Adaptor / Straight Compression x BSP Male Connector
• Pipe Size Compatibility: 1.25″ BSP Male Thread to 32mm–36mm Outside Diameter (Standard 1.25″ Waste)
• Material Compatibility: Plastic Push-Fit, Solvent Weld, Copper, and Lead Pipes
• Connection Type: 1.25″ BSP Male Thread Inlet x 32mm-36mm Compression Outlet
• Material: High-Quality Polypropylene
• Application: Connecting Directly to Basin Traps and Repositioning Waste Runs in Restricted Spaces

Details

When installing wash basins where standard trap placements cause clearance issues or look untidy, adjusting the layout is key. This threaded male basin trap adaptor solves the problem by screwing directly into the trap inlet via a 1.25″ male thread, letting you run pipework neatly down and reposition your trap for better space management and aesthetics.

Instructions

1. Simply slide the white nut over the pipe first along with the nylon washer, before the pointed black rubber washer
2. Make sure that the black rubber washer is pointing the thin end towards the white fitting you have yet to put on and slide the rubber on an inch or so
3. Push the rest of the fitting on so that the rubber joins up with the plastic fitting, you may then try and push the fitting with the rubber further down the pipe if need be
4. Finally bring the nut back and screw onto the rest of the fitting, compressing the pointed washer against the plastic to make a seal, then repeat the action for the other side and that’s it!

Discover

Explore Our Full Range of Waste Adaptors – CLICK HERE