Threaded Male Trap Adaptor (1.5″ to 40mm-43mm)

Threaded Male Trap Adaptor (1.5″ to 40mm-43mm)

Features

This threaded male trap adaptor connects a 1.5″ male thread directly to bath or kitchen sink traps. It steps down to a multifit compression outlet for a fast, tool-free connection.

• Direct Trap Connection: Features a 1.5″ male thread that connects directly into the inlet of bath, shower, or kitchen sink traps.
• Multifit Compression Outlet: Accommodates standard waste pipes measuring 40mm to 43mm across plastic, copper, and lead systems.
• Flexible Position Adjustment: Allows you to easily move your trap position when short on space or for improved visual aesthetics.
• Universal Material Compatibility: Bridges pipes securely across plastic push-fit, solvent weld, copper, and lead.
• Durable Polypropylene Build: Constructed from high-grade polypropylene to withstand daily hot water discharge and household chemicals.

Technical

• Brand: VIVA
• MPN: W40M
• Product Type: Threaded Male Trap Adaptor / Straight Compression x BSP Male Connector
• Pipe Size Compatibility: 1.5″ BSP Male Thread to 40mm–43mm Outside Diameter (Standard 1.5″ Waste)
• Material Compatibility: Plastic Push-Fit, Solvent Weld, Copper, and Lead Pipes
• Connection Type: 1.5″ BSP Male Thread Inlet x 40mm-43mm Compression Outlet
• Material: High-Quality Polypropylene
• Application: Connecting Directly to Bath and Kitchen Sink Traps and Repositioning Waste Runs in Restricted Spaces

Details

Tight spaces can cause clearance issues or messy layouts during bath and kitchen sink installations. This threaded male trap adaptor screws directly into the trap inlet via a 1.5″ male thread. It lets you run pipework neatly and reposition your trap for better space management.

Instructions

1. Simply slide the white nut over the pipe first along with the nylon washer, before the pointed black rubber washer
2. Make sure that the black rubber washer is pointing the thin end towards the white fitting you have yet to put on and slide the rubber on an inch or so
3. Push the rest of the fitting on so that the rubber joins up with the plastic fitting, you may then try and push the fitting with the rubber further down the pipe if need be
4. Finally bring the nut back and screw onto the rest of the fitting, compressing the pointed washer against the plastic to make a seal, then repeat the action for the other side and that’s it!

Discover

Explore Our Full Range of Waste Adaptors – CLICK HERE