Threaded Female 95-Degree Waste Elbow Connector (1.5″ to 40mm)

Threaded Female 95-Degree Waste Elbow Connector (1.5″ to 40mm)

Features

This threaded female 95-degree waste elbow connector adapts a 1.5″ BSP male thread straight into rigid plastic waste pipe while introducing a gentle 95-degree angle. Featuring a captive spinning nut and a multifit compression outlet, it provides a fast, watertight connection with the required drop for safe drainage flow.

• Threaded Female Conversion: Connects bath, basin, or shower threads directly to waste lines while altering direction.
• 95-Degree Fall Angle: Engineered with a specific 95-degree angle to provide the required drop on a waste pipe for water to flow away safely.
• Captive Spinning Nut: Features a captive female spinning nut design to prevent awkward pipe twisting during installation.
• Multifit Compression Outlet: Perfectly accommodates standard 1.5″ waste pipes measuring 40mm to 43mm in outside diameter.
• Secure Watertight Seal: Supplied complete with an internal rubber washer for a reliable compression seal.

Technical

• Brand: VIVA
• MPN: W40G
• Product Type: Threaded Female 95-Degree Bath & Shower Waste Elbow Connector
• Pipe Size Compatibility: 1.5″ BSP Thread to 40mm–43mm Outside Diameter (Standard 1.5″ Waste)
• Bend Angle: 95 Degrees (Includes Integrated Drainage Fall)
• Material Compatibility: Plastic, Copper, and Lead Waste Pipes
• Connection Type: 1.5″ BSP Female Spinning Nut x 40mm-43mm Compression Outlet
• Material: High-Grade Polypropylene
• Application: Connecting Fixture Threads to Waste Lines with a Built-in Fall Angle for Safe Water Discharge

Details

When connecting baths, basins, or showers to waste pipes, maintaining the correct downward slope is essential to prevent standing water and slow drainage. This threaded female 95-degree waste elbow connector solves the issue by attaching directly to the fixture thread and turning off at a 95-degree angle, ensuring the required drop for water to flow away safely.

Instructions

1. Simply slide the white nut over the pipe first along with the nylon washer, before the pointed black rubber washer
2. Make sure that the black rubber washer is pointing the thin end towards the white fitting you have yet to put on and slide the rubber on an inch or so
3. Push the rest of the fitting on so that the rubber joins up with the plastic fitting, you may then try and push the fitting with the rubber further down the pipe if need be
4. Finally bring the nut back and screw onto the rest of the fitting, compressing the pointed washer against the plastic to make a seal, then repeat the action for the other side and that’s it!

Discover

Explore Our Full Range of Waste Adaptors – CLICK HERE