McAlpine MZ20 Offset Bend 45° – 2″ Compression Multifit Drain Connector

McAlpine MZ20 Offset Bend 45° – 2″ Compression Multifit Drain Connector

Ideal for urinal connections where constant maintenance are key

• Simple ‘nut & cone’ washer connection
• No tools needed
• Will join 50mm to 55mm and anything in between
• Perfect for bath, kitchen sink, shower tray, wet room, washing machine & dishwasher waste pipes needing an increased diameter
• For various waste pipes such as plastic push fit, plastic solvent weld, iron or copper etc… with the same outside diameters

For thicker waste pipes such as iron or smaller diameter pipes the plastic insert may have to be carefully cut out in order to install

Instructions:

1. Simply slide the white nut over the pipe first along with the nylon washer, before the pointed black rubber washer
2. Make sure that the black rubber washer is pointing the thin end towards the white fitting you have yet to put on and slide the rubber on an inch or so
3. Push the rest of the fitting on so that the rubber joins up with the plastic fitting, you may then try and push the fitting with the rubber further down the pipe if need be
4. Finally bring the nut back and screw onto the rest of the fitting, compressing the pointed washer against the plastic to make a seal, then repeat the action for the other side and that’s it!

Details

The McAlpine MZ20 Offset Bend provides a high-quality, adjustable solution for tricky 2″ drainage alignments. This 45° fitting features the world-renowned Multifit connection, which securely joins to 50mm, 52mm, and 55mm waste pipes. Specifically, the internal seal design accepts various pipe materials, including plastic, copper, and lead. Its offset 45-degree angle allows for precise positioning in tight spaces beneath showers, urinals, or commercial sinks. Consequently, this genuine McAlpine part ensures a permanent, leak-proof joint that withstands the rigors of heavy-duty drainage.

Aligning mismatched pipes in tight spaces often uncovers a frustrating installation hurdle. Specifically, when a shower or urinal outlet doesn’t line up perfectly with the existing waste stack, rigid pipes offer zero flexibility, often leading to stressed joints and inevitable leaks. Furthermore, finding a fitting that adapts to older, non-standard pipe sizes usually involves a box full of messy reducers and solvent glues. However, the McAlpine MZ20 Offset Bend solves these issues. Its Multifit technology eliminates the guesswork by gripping 50mm to 55mm pipes with a simple, hand-tightened compression nut. The 45-degree offset provides just enough “kick” to bypass obstacles or correct slight misalignments without the need for heat tools or glue. Therefore, you complete professional-grade plumbing repairs in half the time with a single, reliable component.

Brand:

• McAlpine

MPN:

• MZ20